Honda BF8, BF9.9 and BF10 Outboard Motors Shop Manual., Page 62Get this manual
REMOTE CONTROL TYPE 1) Remove the engine cover and right engine under cover (P3-3 and 4)
[I] STOPPER
12l THROTTLE LEVER
2) Move the control lever to the full open position, and check that the throttle arm stopper boss is in contact with the full open stopperAt this time, the throttle lever should contact to the stopperIf it is not, adjust as follows
STOPPER
3Disconnect the throttle control cable pivot from the throttle arm4) Loosen the mm throttle rod joint bolt
5) Move the throttle arm until the throttle arm stopper
boss is in contact with the full open stopper and hold the throttle arm in this position
6) Move the throttle rod until the carburetor throttle lever
is in contact with the stopper and tighten the mm rod joint bolt securely
[71 FULL OPEN