Honda BF8, BF9.9 and BF10 Outboard Motors Shop Manual., Page 57Get this manual
10) Turn the crankshaft clockwise by turning the flywheel clockwise (in the arrow marked direction) until the ''1''
#I timing mark on the timing belt driven pulley aligns with the" mark on the cylinder headIn this position, the No1 cylinder is at top dead center of its compression strokeDon't turn the flywheel counterclockwise
111 ARROW 131 TIMING BELT DRIVEN PULLEY
TIMING MARK
) With the engine in the position described in step
10, check the intake and exhaust valve clearances at No1
cylinder by inserting feeler gauge between the valve stem and the rocker armValve ckarances IN
[I] CYLINDER NO
EXHAUST VALVE
121 NO1 CYLINDER INTAKE VALVE
0.15- 0.19 (0.006-0.007 in) 0.210.25 (0.008 0.010 in) -