Honda BF75 BF100 Outboards Service Manual, Page 26Get this manual
HONDA BF75BFIOO
COl TYPE NOTE: COl system does not require adjustment, except when the COl unit is replaced andor the pulser coil is removedThe timing remains unchanged as long as the set parts remain undisturbed(1) To set timing, align the flywheel "T" mark and the punch mark on
[3lMarks
the cam pulley as shown, then install the timing belt(2) Rotate the flywheel one complete turn and align the "F" mark with
the aligning markLoosen the two screws and move the pulser coil so the marks on the coil and advancer rotor are in line
Pulser Coil
5VALVE CLEARANCE ADJUSTMENT
(1) Rotate the flywheel to align the "'T" mark on the flywheel to the
inde" mark on the starter case(2) Check the clearance of both valves on the camshaft base circle by
inserting the faeler gauge between the adjusting scraw and the valve Item