Honda BF50 (5HP), BF5A Outboard Motors Shop Manual 2014, Page 128Get this manual
IVDISASSEMBLY AND SERVICE 1FLYWHEELELECTRICAL EQUIPMENT
2PISTONBREATHER CHAMBER
1FLYWHEElELECTRICAL EQUIPMENT
aDISASSEMBLYREASSEMBLY
IGNITION COIL FLYWHEEL DISASSEMBLY: Remove by using the FLYWHEEL PULLERINSPECTION: P16 REASSEMBLY: Insert long feeler gauge between the coil and flywheel, then push the coil toward the flywheel while tightening the bolts Avoid the magnet part of the flywheel when adjusting Both gaps should be adjusted simultaneouslyCLEARANCE: 0.20.5 mm (0.0080.020 in) 0.2- 0.5 mm (0.0080.020 in)
FLYWHEEL (Commercially available)
14 mm SPECIAL NUT DISASSEMBLY REASSEMBLY: Hold the flywheel by placing screw driver in the pulleyTORQUE: 74 Nm (55 Ibfft) STARTER PULLEY REASSEMBLY: Align the dowel boss on the pulley with the hole in the flywheel