Honda BF35A-BF45A Outboard Motors Shop Manual., Page 454Get this manual
8)Set the control lever in the 'F" (Forward) position, throttle arm in the full open position and the fast idle lever in the "Idle position" respectively
1 Connect the throttle control cable to the throttle
arm and secure with the mrn washers and mrn lock pin
9) Pull the throttle control cable lightly and bring the
cable free play to the longer side
CAUTION: Set the washers on both sides of each arm as shownTHR0l-M CONTROL CAB PIVOT SHIFT
LOCK NUT
FULL OPEN
THROTTLE ARM
6 mm WASHERS
6 mm LOCK PIN
THROlTLE ARM
THROlTLE CONTROL CABLE
IDLE LEVER
CONTROL LEVER