Honda BF35A-BF45A Outboard Motors Shop Manual., Page 450Get this manual
7) Assemble the neutral lock block with the control housing and tighten the two screws IOITighten the housing cover with the two screwsTorque: N-m (0.2 kgfm, 1.4 lbf4t)
Torque: N.m (0.2 kgf-m, 1.4 Ibf-ft) NEUTRAL LOCK BLOCK
NOTE: Set the switch wire grommet by aligning it with the cutout the control housing (Power trimltilt type)Do not overtighten the screws
8) Connect the switch wire connector (Power trimhilt type)9) Set the power tilt switch harness as shownInstall the hold-down plate and tighten the two screws (Power trimhilt type)