Honda BF35A-BF45A Outboard Motors Shop Manual., Page 426Get this manual
6) Clamp the motor wire to the motor cord bracket with
the wire bandAfter securing the wires with new wire bandcut the end so projected end length ismm (0.1 0.2 in)7) Set the wire band clips on the clip bracket B, and secure the motor wire with themMl WIRE BAND CLIP (2)
[2] MOTOR CCIRE
After securing the wires with new wire band clip, cut the end so projected end length ismm (0.1 0.2 in)
dAIR BLEEDING
1) Lay the power trimltilt assembly on its side with the oil filler port facing up2) Connect the battery, power trimhilt relay and the
[OIL FILLER HOLE
power trimltilt switch so that the power trimltilt assembly functions while it is dismounted from the outboard motor3) Check that the manual valve is looseUsing syringe or equivalent tool, pour ATF in the oil tank slowly to fill it up4) After filling the oil tank, tighten the manual valve securely0