Honda BF35A-BF45A Outboard Motors Shop Manual., Page 356Get this manual
2) After installing the power trimhilt assembly, tighten the 78-14 UNF self-locking nut to the specified torqueThen turn it back 112314 turns 111 78-14UNFSELFLOCKING NUT,
TORQUE: 39 Nm (4.0 kgfm Ibfeft) 29
3) Route the power trimhilt motor and trim angle sensor wires and secure them with the clips
[WIRE HARNESS CLIP
together with the power trimltilt switch wire and power trimltilt relay wires as shown