Honda BF35A-BF45A Outboard Motors Shop Manual., Page 185Get this manual
HONDA BF35A-45A
THROTTLE CABLE
REASSEMBLY: 1) Turn the throttle grip to the full open position, then back it off mm (0.1 in) from the fully open position and tighten the friction bolt
2) Adjust the closed side and open side of the throttle cables to the length shown in the drawing
Before adjusting the throttle cable length, be sure that the throttle cables are connected the outboard motor securely (page 15-61
65.5-66.5 mm (2.58-2.63 in)
1I CLOSED SIDE
(1.82-1 in) .6
11 OPEN SIDE
3) Connect the throttle cables to the throttle arm
4) Connect the throttle cables to the throttle bracketNOTE