Honda BF35A-BF45A Outboard Motors Shop Manual., Page 119Get this manual
8 95 mmI6 40 mm FLANGE BOLT REASSEMBLY: Tighten the eight 95 rnm flange bolts and the ten 40 mm flange bolts the specified torque in the numbered sequence shown in the drawingAfter tightening the 95 rnrn flange bolts to the specified torque, mark the alignment position on the bolts and crankcase, then tighten the bolts additionally 90+i TORQUE: 95 flange bolt 28 N-m (2.8 kg-m, 20.2 ft-lb), then additionally tighten 900+26 flange bolt N-m (1- kg-m, 8.0 ft-lb) I
22 mm LOCK NUT
DISASSEMBLYIREASSEMBLY: 1) Hold the crankshaft using the special tool when removinglinstalling the mrn lock nut2) Remove the 22 mm lock nut by using the following special toolsTOOLS: Lock nut wrench Ring gear holder