Honda BF35A-BF45A Outboard Motors Shop Manual., Page 117Get this manual
CRANKCASE 1) Remove the engine (P.7-2) 2) Remove the cylinder head (P.9-2)
Ill 40 (101
REASSEMBLY: P10-4 Apply locking agent and tighten to the specified torqueMark the alignment position on the bolts and crankcase, then additionally tighten 90+f' TORQUE: 28 N-m (2.8 kg-m, 20.2 ft-lb), then additionally tighten go0+?INSPECTION: P1 0-3
REASSEMBLY: P10-4
1 N-m.1 kg-m, 8.0 ft-lb)
mm PLAIN WASHER (8)
[41 MAIN BEARINGS
REASSEMBLY: Use care not to damage the bearingsMake sure the locking lug on each bearing fits in the notch in the crankcaseSELECTION: P10-13 151 32 mm DOWEL PIN (81