Honda BF35A-BF45A Outboard Motors Shop Manual., Page 89Get this manual
HONDA REMOVAL
1) Set the adjusting rod in the second hole from the rear of the stern bracket as shown
2) Move the shift lever the "N" position, loosen the lock nut and adjusting nut connecting the shift rod and B, and disconnect the shift rods
3) Remove the four 25 mm hexbolts and the leftlright lower mount housings, and disconnect the ground cable from
the left side of the extension case assembly4) Remove the 12 162 mm hexbolts and the leftlright lower mount rubbers 5) Remove the 30 mm15 45 mm screws, six screw rivets and the under cover6) Remove the ten 35 mm hexbolts and the extension case assembly7) Remove the oil pan (P12-2)