Honda BF35A-BF45A Outboard Motors Shop Manual., Page 63Get this manual
HONDA BF35AA
cINSTALLATION
1) Set the special tool on the pulser rotor as shown, and turn the pulser rotor until the "T4" mark on the pulser rotor aligns with the "Tf" mark on the cylinder headCAUTION
31I 56 mm LOCK NU1 1
1 PULSER ROTOR
1 "T4" MARK 3
Do not turn the pulser rotor clockwiseTOOL: 56 mm lock nut wrench
07LPA- ZV30200
[61 PULSER ROTOR
CYLNDER HEAD
2) Set the 10 mrn dowel pin and flywheel on the crankshaft and loosely tighten the four 10 25 mm flange bolts3) Turn the flywheel counterclockwise and align the "T" mark on the flywheel with the "I" mark on top of the engine hanger mounting bossCAUTION
Fuzeturn the flywheel in the direction of the arrow1