Honda BF35A-BF45A Outboard Motors Shop Manual., Page 61Get this manual
4) Loosen the 12 mm SH flange bolt on the solenoid body stayCheck that the ""mark on the reverse side of the remote choke solenoide body is pointing up5) Push the plunger to the right and determine the position where it stopsThen, move the solenoid body until it contacts the plunger6) Tighten the 12 rnm SH flange bolt to the specified torqueTORQUE: N-m (0.9 kg-m, 6.5 ft-lb)
111 REMOTE CHOKE SOLENOID BODY
f1 "f"MARK 5
[21612rnrnSH
CHOKE SOLENOIDE BODY
TIMING BELT
aINSPECTION
1) Remove the engine cover and timing belt coverI11