Honda BF35A-BF45A Outboard Motors Shop Manual., Page 57Get this manual
2)Check that the reference marks on the throttle cam align with the center of the rollerIf they do not align, adjust as follows
1 REFERENCE MARKS 2
3) Remove the mm lock pin and mm plain washers from
the shift pivot, and detach the shift pivot from the throttle arm4) Loosen the shift pivot lock nut and adjust by turning the shift pivotAfter adjustment, tighten the lock nut and attach the shift pivot the throttle arm
1 [I] mm PLAIN WASHER (21 6
1 SHIFT PIVOT -
6 mm LOCK
THROTTLE ARM