Honda BF115A, BF130A Outboard Motors Shop Manual., Page 463Get this manual
HONDA BFH5Ae BF130A
0 Check the gearshift operation with the remote control leverCheck motor operation at trolling speedUse the minimum amount of throttle opening necessary to operate boat at safe trolling speed for 15 minutes
IN THE WATER
OUTBOARD MOTOR INSTALLATION Check that there are no water leaks from the motor mounting bolt holes
0 Check boat for balanced weight distributionOUTBOARD MOTOR OPERATION
0 Check neutral switch for proper operation0 Turn the ignition switch ON and make sure the buzzer sounds twiceTurn switch OFF0 Turn the ignition switch ONMake sure the Programmed Fuel Injection (PGM-FI) light, Alternating Current Generator (ACG) light, and the Oil Pressure light come onThe oil pressure light should go out after seconds0 Turn the ignition switch to the START position and start the engine
0 Dual Motors: Adjust tie bar length so the motors toe-outToe-out is when the motors' forward measurement is wider than the motors' aft measurementMotors with toe-out (viewed from the stern) will ensure better boat stabilityIt is best if the wakes of two motors join 66 82 ft (2025 meters) astern-