Honda BF115A, BF130A Outboard Motors Shop Manual., Page 450Get this manual
HONDA BF115AeBF130A
Throttle Cable Connection
41Put the remote control lever in the neutral position2Thread the pivot shaft onto the threaded portion of the throttle cableApply marine grease to the pivot pin
Move the remote control lever to the full throttle positionMake sure the throttle arm contacts the throttle arm stopperIf the throttle arm does not contract throttle arm stop, check for full stroke at the remote controlTHROTTLE CABLES CLOSE OPEN
3Adjust the pivot shaft until it will insert into the throttle armInstall the pivot shaft from the engine sideInstall washers on both sides of the arm and secure with lock pin
If Honda Premium Remote Control is installed the following optional spacers are available to gain additional remote control lever travelPart Description