Honda BF115A, BF130A Outboard Motors Shop Manual., Page 402Get this manual
Pinion gear shim selection table
[3]Unit: (in)1Calculation value 2
0.41 (0.016) 0.35 (0.014)
0.35 (0.014) 0.30 (0.012)
0.30 (0.012) 0.25 (0.010)
0.25 (0.010) 0.20 (0.008)
0.20 (0.008) 0.15 (0.006)
0.15 (0.006)0.10 (0.004) 0.10 (0.004) 0.05 (0.002)
[3]Unit: (in) 11 Calculation value 2
0.05 (0.002) (0.000)-0.05 (-0.002)-0.10 (-0.004)-0.15 (-0.006)-0.20 (-0.008)-0.25 (-0.010) (0.000) -0.05 (-0.002) -0.10 (-0.004) -0.15 (-0.006) -0.20 (-0.008) -0.25 (-0.010) -0.30 (-0.012)
How to read shim selection table When the engagement mark on the gear case is and the calculation value 0.20 (0.008 in) or more and less than 0.25 (0.01 in), the shim thickness is 0.45 (0.018 in)(See Example below When the calculation value is 0.15 mrn (0.006 in) or more and less than 0.20 rnm (0.008 in), the shim thickness is 0.50 (0.020 in)(See Example below