Honda BF115A, BF130A Outboard Motors Shop Manual., Page 349Get this manual
HONDA B 15A-130A
SHIFT SHAFT ALIGNMENT
Correct the shift shaft from the condition of the seal holder being out of position1) Turn the shift shaft until the shift shafts and contact the stoppers in the mounting case as shown
[21 SHIFT SHAFT 111 STOPPER
STOPPER
When turning the same direction, it is all right for the shift shafts and to be in contact with either the right or left stopperWith the shift shafts and in contact with their respective stoppers, turn the shift shaft so that its gear is above the gear of the shift shaft AThen, back off the shift shaft slightly until the gear of the shift shaft engages with the gear of the shift shaft AEngage the gears with care not to move the shift shaft A[61 MOUNTING CASE
[31 Back off slightly
3) After correcting the shift shaft B, check whether shifting can be made properly41 Install the seal holder