Honda BF115A, BF130A Outboard Motors Shop Manual., Page 334Get this manual
HONDA BF115A-130AASSEMBLY
Install the O-ring, oil seal and metal on the front bracket (P14-24)Install the breaker assembly and brush holder B, and tighten the screwsConnect the blue wire terminal to the breaker assemblyNOTE: Do not touch the bimetal part of the breaker assemblyInstall the brush holder on the front bracketWith the brush assembly terminal above the green wire terminal, tighten together with the green wire terminalBe sure that the brush assembly terminal and the green wire terminal contact the respective projections as shownInstall the two springs and install the armature on the front bracket while pushing the brush terminal into the holder
1 111 FRONT BRACKET
121 BREAKER ASSEMBLY
[8] BLUE WIRE
[ITERMINAL
GREEN WIRE
[21 ARMATURE 111 SHOP TOWEL
131 SHAFT
[41 MOTOR