Honda BF115A, BF130A Outboard Motors Shop Manual., Page 324Get this manual
HONDA BF115A130A
26) Install the power tilt motor assembly on the pump assembly by aligning the projection on the motor assembly with the cutout in the drive joint
111 PROJECTION
Tighten the four hexbolts to the specified torqueTORQUE: (0.5 kgfm, Ibf-ftl 3.6
CUTOUT IN THE DRIVE JOINT
27) Install new O-ring on the cylinder compInstall the oil tank
on the cylinder cornp and tighten the three hexbolts to the specified torqueTORQUE: (0.5 kgf-m, 3.6 Ibf-ft)
28) Remove the oil tank capPour new Automatic Transmission Fluid (ATF) to the upper limit of the oil tank filler port