Honda BF115A, BF130A Outboard Motors Shop Manual., Page 295Get this manual
LCD and XCD types only 9) Hold the propeller shaft securely with the puller as show, and tighten the puller bolt to the specified torqueTORQUE: N-m (0.5 kgfem, 3.6 Turn the vertical shaft to 10 times clockwiseTOOLS: Puller jaws Puller bolt
111 PULLER JAWS 07SPC-ZWOOIO Z
07SPC-ZW001O 07SPC-ZWOOI1Z
PULLER BOLT
10) Attach the special tool to the vertical shaft as shown, and adjust the dial gauge so its needle is at line "2" of the special tool11) Turn the vertical shaft lightly right or left and record the dial gauge readingMeasure the backlash at the four points (by turning the vertical shaft 90in the same mannerNOTE: Do not turn the propeller shaft when turning the vertical shaft12) Obtain the forward bevel gear backlash using the dial gauge
111 VERTICAL SHAFT INDICATOR ATTACHMENT 07WPK-ZW50100
BACKLASH INDICATOR TOOL o7pj-ZW0030
runout and the following formulaFormula: Dial gauge runout 1.03Backlash Example: When, dial gauge runout is 0.195 0.195 1.030.20