Honda BF115A, BF130A Outboard Motors Shop Manual., Page 265Get this manual
cREMOVALIINSTALLATION 121 CROSS PIN RING
#6 STEEL BALL (2)
CLUTCH SHIFTERISHIFT SLIDERISHIFTER PIN
REMOVAL:
1) Pull the shift slider with care not to let the #6 steel balls pop out, and remove the #6 steel balls2) Remove the cross pin ring and 47 mm shifter pin, and remove the clutch shifter, shift slider, two #I steel balls and the shift spring
47 mm SHIFTER PIN
I51 SHIFT SLIDER
INSTALLATION: LCD and XCD types: Be sure that the bearing holder assembly, thrust bearing, washer and the shim are set on the propeller shaft holder assembly (P12-20and 21)1) With the "F" mark on the clutch shifter toward you (toward the forward bevel gear on the LD and XD types or toward the reverse bevel gear on the LCD and XCD types), assemble the clutch shifter and the propeller shaft by aligning the long hole in the propeller shaft with the 47 mm shifter pin hole