Honda BF115A, BF130A Outboard Motors Shop Manual., Page 230Get this manual
INSTALLATION: 1) Degrease the mating surface between the crankcase and the cylinder block2) Before installing the crankcase, apply the liquid gasket (Three Bond141C or equivalent) to the lightly shaded part shownApply liquid gasket (Three Bond #I2808 or equivalent) to the deeply shaded part shownDo not apply liquid gasket to the crankshaft main journal and the bolt holes3) Apply bars f03.04.0 (0.120.16 in in thickness] of liquid gasket (Three Bond #I2808 or equivalent) to the indicated points of the cylinder block4) When tightening the bolts, be sure that small amount of liquid gasket (Three Bond #1280B or equivalent) is oozing out from the flywheel installation side of the mating surfaceIf the cylinder block has been left for minutes or more after application with liquid gasket, remove the crankcase and apply the liquid gasket to the specified parts again111 Crankcase side:
121 Apply liquid gasket W1141C or equivalent) the lightly shaded part