Honda BF115A, BF130A Outboard Motors Shop Manual., Page 199Get this manual
HONDA BF115A-130A
bINSTALLATION
Installation is the reverse order of removalNote the followingCheck that the oil control orifice is mounted on the cylinder blockInstall the two 14 20 mm dowel pins and new cylinder head gasket (P.9-4)Install the cylinder head assemblyApply the engine oil to the threaded section and the seating surface of each bolt, and loosely tighten the bolts against the cylinder head131
111 MARK ON CYLINDER HEAD
"1" MARK ON FLANGED PART
12 163 mm BOLT-WASHER (10)