Honda BF115A, BF130A Outboard Motors Shop Manual., Page 176Get this manual
12 38 mm FLANGE BOLT [I1 TIMING BELT DRIVEN
Using the special tool as shown, remove and install the 12 38 mm flange boltOn installation, apply engine oil to the threaded part and the seat of the 12 38 mm flange bolt, and align the "4T" mark on the driven pulley with the" mark on the timing belt lower coverTORQUE: 98 Nm (10.0 kgf-m, 72 Ibfoft) TOOL: Lock nut wrench, 56 mm
111 TIMING BELT DRIVEN p
07LPA-ZV30200
1I TIMING BELT
LOCK NUT WRENCH,
ALIGNMENT MARKS TIMING BELT LOWER COVER