Honda BF115A, BF130A Outboard Motors Shop Manual., Page 172Get this manual
PULLER LOCK NUT REMOVALJINSTALLATION: Using the two offset wrenches (10 mm and 22 mm) as shown, remove and install the puller lock nutTORQUE: 110 N-m (11.2 kgf-m, 81 Ibfsft)
22 rnrn OFFSE
121 10 rnm OFFSET
eINSPECTION (Unit inspection)
BRUSH HOLDER ASSEMBLY
Measure the brush lengthIf the measurement is less than the service limit, replace the brush holder assemblySTANDARD
10.5 mm (0.41 in)
SERVICE LIMIT
8.4 mm (0.33 in)