Honda BF115A, BF130A Outboard Motors Shop Manual., Page 169Get this manual
HONDA BF115A430A
0[I1 WIPE WITH SHOP TOWELBe sure to degrease, clean or lubricate the following parts before installation
X[21 DECREASE: 131 LUBRICATE WITH OIL[41 16 49 BOLT-WASHER
Wipe the entire surface of the bolt-washer (especially the washer and the crankshaft pulley mating surface) with clean shop towelApply engine oil to the flanged part of the bolt and the washer mating surfaceApply engine oil to the threaded part of the boltDo not apply engine oil to the washer and the crankshaft pulley mating surfaceCrankshaft pulley Remove oil from the bottom of the crankshaft pulley boss using degreasing cleaning agentWipe the bolt-washer mounting surface on the crankshaft pulley using clean shop towelDo not contaminate the belt installation parts with oilBalancer belt drive pulley Remove oil from the crankshaft pulley and the timing belt drive pulley mating surface tuoroughly using degreasing cleaning agentDo not contaminate the belt installation parts with degreasing cleaning agentTiming belt drive pulleyjtiming belt guide plate Wipe the entire surface of the timing belt drive pulley and the timing belt guide plate using clean shop towel[ITIMING BELT GUIDE PLATE