Honda BF115A, BF130A Outboard Motors Shop Manual., Page 152Get this manual
HONDA BF115A-130A
he fuel filter on the vannr scnaratnr
hu alinninn thoA-8) Loosely tighten the fuel pipe flare nut
t1 FUEL FILTER 3
9) Install the fuel filter band, and loosely tighten the 14 m
flange bolts10) Tighten the fuel pipe flare nut securely taking care not to let the alignment mark on the vapor separator and the fuel hose come out of alignment
FUEL TUBE C
TORQUE: 37 Nm (3.8 kgfwm, 27 Ibfft)
11) Tighten the 12 sealing nut to the specified torque
TORQUE: 22 Nom (2.2 kgf-m, Ibf-ft) 6
12) Tighten the three 14 flange bolts securely13) Install the fuel tube (P5-62)
14) Install the vapor separator on the outboard motor
15) Set the new 12 sealing washer on the fuel hose under the fuel line comp and install the fuel hose by aligning the fuel hose tab with the hole in the fuel lineInstall the new 12 sealing washers and tighten the fuel pressure check nut to the specified torque