Honda BF115A, BF130A Outboard Motors Shop Manual., Page 88Get this manual
HONDA BF115A-130A
Clean the flare nut joint part of the fuel pipe before installing the fuel pipeInstall the injector noting the connector angleFLARE NUT JOINT PART
31 Check after operation: Check the parts for secure installation and the bolts, screws and other fasteners for secure tighteningConnect the battery cable to the battery negative (-1 terminal4) Fuel leak check: Turn the ignition switch ON (but do not turn the starter) after connecting the fuel linesThe fuel pump unit should operate for approximately seconds and the fuel pressure in the high pressure side fuel line should riseRepeat this operation or times and check for fuel leakage51 When the boat is equipped with radio equipment: The ECM and its wires are designed to be unaffected by radio wavesHowever, the ECM can malfunction when it senses an extremely powerful electric waveNote the following to avoid malfunction of the ECM