Honda B75K2-B75K3 Outboard Motors Manual., Page 56Get this manual
Part and item
Propshaft Run out Bevel gear bearing journal O.DShaft spline run out at assembly Back lash of pinion and gears Bevel gear I.DGear-to-shaft clearance Shift rod (push rod) O.DShaft-to-gear case clearance
Amembly standard
Service limit
0.020 (0.0008) 16.960 (0.6677) 0.050 (0.0020)
6TROUBLE SHOOTING
Trouble
Probable cause
1No fuel in tank 2Improper connection of fuel tubes 3Clogging of fuel filter of tank and
P remedy
RefillCheck and repairCheck and repairAdjust carburetorCheck and repairCheck and repair carburetorCheck and repairReplaceAdjust to 0.6-0.7mm (0.0236-0.0276 in Replace ignition coilAdjustRepair or replacePull briskly with full-arm strokeAddChange fuelAdjust carburetorAdjust carburetorCheck and repair carburetorCheck and repair Check and repairCheck and repairCheck and repairReplace ignition coilReplace coil or condenser, Adjust or replaceReplaceCheck and retightenAdjustCheck and repairRepair or replaceRepair or replace