Honda B75K2-B75K3 Outboard Motors Manual., Page 35Get this manual
35 3Anode metal Check the anode metal for corrosion or wear and replace it if necessaryAssembly Install the seal holder on the shift rod, drive in the roller pin and connect the push rodConnect the shift rod to the gear caseWhen the gear case replacement is required, select the gear washer, gear shims and pinion washer according to the identification marks on the gear case and table belowPinion washer
washer mark
Gear shim k
1: Gear washer (2.10mrn or 0.083 in 2: Gear washer (2.15mm or 0.085 in
A: Pinion washer (2.00mm or 0.079 in Pinion washer mark B: Pinion washer (2.05mm or 0.081 in C: Pinion washer (2.10mm or 0.083 in Thickness
-fGear r: Gear
shim(0.20mm or 0.008 in shim(0.25mm or 0.010 In
Gear shim
Thickness mm (in-,