2001-2014 Honda BF/BFP8D, BF/BFP9.9D Outboards Shop Manual, Page 359Get this manual
BF8D-BF9.9D LOWER CHAMBER SIDE HYDRAULIC PRESSURE
1) Remove the internal circlip, manual valve and sealing washer from the valve bodyInstall the special tool (gauge joint body B) and the sealing washer, and tighten the special tool to the specified torqueTORQUE: 1.7 N-m (0.17 kgf-m, 1.2Ibf-ft)
INOTICEI MANUAL VALVE INTERNAL CIRCLIP
Be sure to remove the manual valve with the piston rod fully extended, or TF spurts out small amount of the TF flows out after removing the valveInstall the special tool quickly Install the sealing washer securely not to let it collapse in the valve body
SEALING WASHER
Is.TOOLI
2) Attach the pressure gauge 5000 psi to the gauge joint that is set in the valve body Be sure that the ATF level in the oil tank is at the specified level (P 13-35)
GAUGE JOINT 070PJ-V15A200