2001-2014 Honda BF/BFP8D, BF/BFP9.9D Outboards Shop Manual, Page 353Get this manual
BF80-BF9.90 1} Set the brushes on the each holder2} Apply grease to the bearing and oil seal lip and install the armature Remove burrs from the armature shaft with fine emery paper before assembly Take care not to damage the oil seal during assemblyARMATURE BEARING BRUSH (2)
HOLDER (2)
3} Set the brush springs over the mounting pins of the brush holder4} Set the lower straight part of the brush spring in the groove of the brush holder5} Set the upper straight part of the brush spring on the hook of the brush holder
MOUNTING PIN
BRUSH SPRING