2001-2014 Honda BF/BFP8D, BF/BFP9.9D Outboards Shop Manual, Page 352Get this manual
BF80-BF9.90 16)Hold the valve body in vise as shownTake care not to tighten the vise too tight as it damages the valve body
OUTER TUBE
17)Tighten the outer tube to the specified torqueTORQUE: 152 N-m (15.5 kgf-m, 112Ibf-ft)
- POWER TILT MOTOR
INOTICEI
00 not reuse the G-ring 00 not use shop towelclothglovesetc when
reassembly
Make sure there is no metallic material (e .gwasher, etc on the magnets before installation After installing the yok e, lightly tap on the outer surface of the yoke with plastic hammer (for snug fitting of the armature bearing) mm SCREW (2)