2001-2014 Honda BF/BFP8D, BF/BFP9.9D Outboards Shop Manual, Page 347Get this manual
BF80-BF9.90 12)Apply ATF to the sealing washer, and set it in the valve body at right anglesBe careful not to set it at an inclined anglewhich can lead to the sealing washer collapsing13) Apply ATF to two new a-rings, and install the a-rings on the manual valve14) Tighten the manual valve to the specified torque, and set the internal circiip in the groove in the valve body securelyTORQUE: 1.7 N-m (0.17 kgf-m, 1.2Ibf-ft)
O-RING 2.4 9.8 mm
SEAL WASHER
MANUAL VALVE
1.7 Nem, (0.17 kgfem, 1.2Ibfeft)
INTERNAL CIRCLIP
15) Apply ATF to new a-ring, and install it on the down relief valve seat16) Apply ATF to the down relief valve seat and install it in the valve body 17) Install the steel ball, spring guide and the valve spring in the down relief valve seat18) Apply ATF to the two new a-rings and install the a-rings in the valve body in the positions shown