2001-2014 Honda BF/BFP8D, BF/BFP9.9D Outboards Shop Manual, Page 336Get this manual
BF8D-BF9.9D bDISASSEMBLY INOTICEI
00 not disassemble the gear pump assemblyIf it is faulty, replace it as an assembly 00 not use shop towel, cloth, gloves, etc 00 not reuse the drained automatic transmission fluid (ATF) 00 not hold at the outer tube when holding the power tilt assembly in vise during operation Clean the removed parts in fresh automatic transmission fluid (ATF)and blow each port of the parts with compressed airSet the parts neatly in suitable container with care not to contaminate them with dust and dirt 00 not reuse the O-rings Remove each valve and sleeve with care not to damage the sliding surface of the parts POWER TILT MOTOR 1) Connect the power tilt motor 2P connector and operate the power tilt motor assembly until the piston rod extends fully2) Loosen the manual valve fullyRemove the oil hole cap bolt and drain the ATF in the oil