2001-2014 Honda BF/BFP8D, BF/BFP9.9D Outboards Shop Manual, Page 333Get this manual
BF8DBF9.9D
cREASSEMBLY
1) Apply marine grease to the tilt arm bushings and install them 2) Apply marine grease to the tilt stopper shaft, then install the tilt stopper cam and tilt stoppers 2.5 20 mm SPRING PIN (2)
TILT ARM BUSHING (2) TILT STOPPE (2)
TILT STOPPER CAM
3) Align the pin hole to the tilt stopper and tilt stopper cam as shown and drive the 2.5 20 mm spring pin using commercially available pin driver until the pin end aligns with the tilt stopper cam as shown