2001-2014 Honda BF/BFP8D, BF/BFP9.9D Outboards Shop Manual, Page 330Get this manual
BF80-BF9.90 15) Route the power tilt motor wire harness and control box wire harness and secure the wires with the wire band clipCover the motor and switch wires with the corrugated protector as shown16)Route the power tilt motor wire harness along the main wire harness as shown and wrap the wires with the upper and lower spiral protectors as shown 17) Secure the wires with the wire clamps CORRUGATED PROTECTOR Set the corrugated protector so that its end is approximately mm above the end of the connector bracket B
CONNECTOR BRACKET B
POWER TILT SWITCH WIRE HARNESS (Tiller handle type)
CONTROL BOX WIRE HARNESS (Remote control type)