2001-2014 Honda BF/BFP8D, BF/BFP9.9D Outboards Shop Manual, Page 328Get this manual
BF80-BF9.90 6) Set the motor wire grommet to the power tilt motor wire harness and install them to the left stern bracket by aligning the boss of the grommet with the groove of the left stern bracket 7) Apply grease to the 22 mm wave washer and distance collar, then install the wave washer, distance collar and left stern bracket8) Loosely install new 78-14UNF self-locking nut9) Install the mm washer and mm self-locking nutTighten the mm self-locking nut to the specified torqueTORQUE: 21 Nm (2.1 kgfm, 15Ibfft) 10)Tighten the 78-14UNF self-locking nut to 40 Nm (4.1 kgfm, 30 Ibfft) then loosen 12 turn 11) Install the adjusting rod and tilting bolt caps12) Install the anode and tighten the 12 mm flange bolt securely if the anode removed 13) Make sure that the swivel case moves free7S-14UNF SELF-LOCKING NUT (2) Do not reuse Tighten to 40 N-m (4.1 kgf-m30 Ibf-ft) then loosen 112 turn POWER TILT MOTOR WIRE