2001-2014 Honda BF/BFP8D, BF/BFP9.9D Outboards Shop Manual, Page 288Get this manual
BFBD-BFS.SD cINSTALLATION
Installation is the reverse order of removal Replace the wire band with new one, if it has been cut After securing the wires ith new wire bandcut the end of the wire band as projected length is about 10 mm (0 .4 in)
There should be clearance
SPIRAL PROTECTOR WIRE BAND MAIN WIRE HARNESS
REGULATOR! RECTIFIER WIRE
REGULATOR! RECTIFIER
12A change coid type: FUSE WIRE (white) 6A Charge coil type: CHARGE RECEPTACLE WIRE (Red)
CLIP BRACKET Make sure that there is clearance between the clip bracket and regulator rectifier, and tighten the 14 mm flange bolt securely