2001-2014 Honda BF/BFP8D, BF/BFP9.9D Outboards Shop Manual, Page 274Get this manual
SFBD-SF9.9D
4IGNITION CONTROL MODULENEUTRAL SWITCH
aREMOVAL
1) Remove the following:engine cover (P5- 1)- left engine under cover (P5-3)- neutral start cable (P7-1)recoil starter (P 7-2)- silencer cover (P8- 1)2) Open the wire bands, and then pull off the wire connec tors and disconnect the connectors3) Remove the two 25 mm flange bolts, and remove the connector bracket and ignition control module4) Remove the 14 mm flange bolt and the set plate5) Remove the two 12 mm flange bolts and remove the neutral switch bracket with the neutral switch installed If the neutral switch needs to be removed, remove the 20 mm lock nut and remove the neutral switch and switch plate from the neutral switch bracket