2001-2014 Honda BF/BFP8D, BF/BFP9.9D Outboards Shop Manual, Page 271Get this manual
BFBD-BFS.9D
3CHARGE RECEPTACLE WIRE (6A Charge coil type only)
aREMOVAL
1) Remove the following- engine cover (P5-1)left engine under cover (P5-3) 2) Remove the fuse holder from the fuse holder bracket3) Pull off the white wire (main fuse line) connectors from the clamp on the starter case B, and disconnect them 4) Open the three wire bands and remove the spiral protectors5) Remove the charge receptacle from the connector holder at the tiller handle6) Remove the 14 mm flange bolt and starter cable bracket7) Remove the clip and remove the charge receptacle wire FUSE HOLDER WHITE WIRE (From fuse holder)