2001-2014 Honda BF/BFP8D, BF/BFP9.9D Outboards Shop Manual, Page 248Get this manual
SFBO-SFS.SO 10) Remove the tiller handle bracket11) Remove the spiral protector from the wires and pull out the switch wires and throttle cable, and then remove the oil case grommet from the tiller handle bracket
OILCASE GROMMET
WIRES AND CABLE
TILLER HANDLE BRACKET
3INSPECTION
STARTER SWITCH
The starter switch test can be performed with the switch installed on the tiller handle
Check for continuity between the terminals There should be continuity between the terminals when the switch is pushed and no continuity with the switch free Replace it necessary