2001-2014 Honda BF/BFP8D, BF/BFP9.9D Outboards Shop Manual, Page 245Get this manual
BFBO-BFS.SD 5) Type with electric starter: Release the wire band clip on the connector bracket and remove the wire protector, then disconnect the starter switch and emergency stop switch wire connectors6) Open the wire band and remove the switch wires
STARTER SWITCH
CORRUGATED
PROTECTOR
STOP SWITCH WIRE
7) Remove the mm cotter pin and mm washer and disengage the link rod from the shift shafto Do not reuse the mm cotter pin, replace with new one when reassembly8) Remove the shift lever pivot bolt, 10 mm wave washer, two mm plain washers, mm plain washer and shift lever from the tiller handle9) Remove the link rod boot, link rod and shift lever as an assembly10) Remove the link rod from the shift lever if necessary