2001-2014 Honda BF/BFP8D, BF/BFP9.9D Outboards Shop Manual, Page 213Get this manual
BFBO-BFS.SD 1) Check the tilt lever bushing for wear or damage, replace with new one if necessary2) Apply grease to the tilt lever bushing A3) Connect the release rod to the release rod bracket Install the tilt lever, release rod bracket and tilt lever bracket
TILT LEVER
TILT LEVER BUSHING (2) RELEASE ROD
RELEASE ROD
4) Set the tilt lever, release rod bracket and tilt lever bracket in the position shown and set the new 22 mm and 25 mm spring pins5) Drive the spring pins using commercially available pin driver until the projected length of both ends are equal as shown