2001-2014 Honda BF/BFP8D, BF/BFP9.9D Outboards Shop Manual, Page 172Get this manual
BFBOBFS.SO
6CYLINDER HEAD ASSEMBLY
1) Clean the cylinder head with solvent and blow through all oil passages with compressed air 2) Install new -ring onto the thermo sensor3) Apply liquid sealant (Three Bond #1201, #1215 or equivalent) to the thread of the thermo sensorThen install the thermo sensor and tighten it to the specified torque
OIL SEAL
TORQUE: 18 N'm (1 .8 kgfm, 13 IbHt)
4) Install new oil seal, then app ly grease to the lip of the oil seal
[ Do not reuse[
5) Install the valve spring seats and new stem seals6) Lubricate the valve stem with engine oil and insert the valve into the valve guide by turning the valve slowly to prevent damage to the stem seal7) Install the valve springs with the narrow pitch side facing