2001-2014 Honda BF/BFP8D, BF/BFP9.9D Outboards Shop Manual, Page 150Get this manual
BFBO-BF9.90 8) Clean off oil or grease from the crankshaft and flywheel mating surfaces (tapered section) Make sure that there are no metal objects stuck to the magnets of the flywheel9) Install the flywheel by aligning the woodruff key on the crankshaft with the key groove of the flywheel taking care not to damage the pick-up point of the pulse gen erator10) Apply oil to the thread and seating surface of the flywheel nut
FLYWHEEl
PULSE GENERATOR
PICK-UP SECTION
11) Hold the flywheel using the commercially available flywheel holder and ighten the flywheel nut