2001-2014 Honda BF/BFP8D, BF/BFP9.9D Outboards Shop Manual, Page 137Get this manual
BFBC-BFS.SC 7) Install the connector bracket and secure the two 14 mm flange bolts8) Connect the starter cable to the starter magnetic switch
and secure it with the mm washer and mm self-locking nut9) Tighten the 12 mm flange bolts to the ground terminals:battery ground terminal (Electric starter type) -regulatorrectifier ground terminal (Electric starter type)- engine ground terminal 10) Route the wires and secure the wires with the wire bands as shown Replace the wire bands with new ones if they are cut
ENGINE GROUND TERMINALBATTERY GROUND REGULATOR GROUND TERMINAL TERMINAL
BATTERY POSITIVE CABLE
6 mm TERMINAL NUT Remote control type