2001-2014 Honda BF/BFP8D, BF/BFP9.9D Outboards Shop Manual, Page 136Get this manual
SFBO-SFS.SO
2ENGINE INSTALLATION
1) Install the two 10 mm dowel pins and new oil case gasket Replace the oil case gasket with new one, when reassembling 2) Apply marine grease to the spline of the vertical shaft, and install the engine by aligning the vertical shaft and crankshaft
6 10 mm DOWEL PIN (2)
3) Tighten the engine mount bolts to the specified torque Tighten the bolt in the numbered sequence as shown insteps
TORQUE: 24 Nm (2.4 kgfm, 17 IbHt)
4) Install the exhaust chamber (P4-29)